Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Door Swing Reversal
The refrigerator has the capability of opening
the door from either the left or the right
side . The unit is delivered to you with the
door opening from the left side . To change
the opening direction, please follow these
instructions .
Note: Before reversing the door swing,
unplug the appliance from the mains or
disconnect the electrical power supply .
1 . Remove the screws (6) holding the top panel
(7) to the unit . Remove the top panel
2 . Remove the two screws (1) holding the top
hinge (5) (right side) to the frame . Remove the
top hinge (5) .
3 . Lift the door off the bottom hinge pin and place
it on a nonscratching surface .
4 . Remove the two screws (8) holding the bottom
hinge (2) . Remove the bottom hinge (2) .
5 . Remove the left front leg (4) and transfer it to
the right side .
6 . Before replacing the bottom hinge (2), remove
the hinge pin (9) and reverse the direction of
the hinge (2) . Reassemble the bottom hinge
(2) on the left hand side using the two
screws (8) .
7 . Refit the hinge pin (9) into the bottom hinge (2) .
8 . Lower the door onto the bottom hinge pin (9) .
9 . While holding the door in the closed position,
reassemble the top hinge (5) on the left hand
side using the two screws (1) . Do not tighten
the screws (1) until the top of the door is level
with the counter top .
10 . Refit the top panel using the screws (6) .
Door opening left
Door opening right
Advertenties
Hoofdstukken
Inhoudsopgave
