Inhoudsopgave
Advertenties
MOUNTING
1. Disassemble the diffuser and LED panel.
2. Pull the power cord through the gasket.
3. Fix the fixture on the surface with screws.
4. Connect the power cord on the terminal correctly.
5. Connect the plug of the battery firmly onto the emergency driver.
6. Assemble the LED panel and diffuser.
4
Cable connection
MAINS POWER
Switch
Remove the short cable
Emergency mode version
TESTING
Test emergency function after installation.
N
L
A
L, N = Un-switched line
L1
= Switched line
A
= Test emergency operation
ACCESSORIES - EXIT SIGNS
40010040
40010041
Exit sign - Up
Exit sign - Down
14
L1
40010042
Exit sign - Left
www.prolumia.eu
MAINS POWER
Emergency mode + Sensor version
(switched phase not required)
40010043
Exit sign - Right
PG13.5/M20
Rubber
Metal
Advertenties
Inhoudsopgave
