Advertenties
Beschikbare talen
Beschikbare talen
MOUNTING FRONT LIGHT
1. Slide the bottom of the BEAM (1) into the rails on the holder (2).
2. Place the holder on the handlebar and attach the rubber band (3) to the intended
place on the holder (4).
3. Then attach the rubber band (5) to the holder (6)
To remove the BEAM follow the steps below:
1. Push the clip (7) on the top of the holder and slide the
BEAM out of the holder.
2. To remove the holder from the handlebar: remove the
rubber band (8) from the holder's mounting hook (6). The
holder can now be removed.
MOUNTING REAR LIGHT
1. Slide supplied velcro strap through opening In your HALO light
2. Mount HALO light to seatpost
3. Tighten velcro strap and lock in
USAGE
- IPX65 degree of protection makes the BEAM water splash proof. IP64 certification
makes the HALO light splash and dustproof.
- If the lights are not used for a long time, make sure they are fully charged and
repeat this after 3 months when the lights are not being used. In this way the battery
capacity remains in good condition.
WARRANTY
- This product has a one-year limited warranty from the day of purchase. This
warranty includes mechanical and electrical defects, as well as manufacturers
defects in workmanship and materials
- No warranty on defects or damage resulting from excessive use or repairs
performed by an unauthorized company/person.
QUALIFICATION
Copyright Lightyourbike 2021 ©
Advertenties
