Advertenties
Beschikbare talen
Beschikbare talen
Usage
• Screw the connector (B) onto the
pump (A), cut the hose connector (C)
to the desired diameter and fasten this
to the connector (B).
• Connect the pond hose to the hose
connector using a hose clamp (not
supplied).
• Install the pump in your pond at least
20 cm below the surface of the water.
Make sure that the pump is seated
firmly.
• Never lift the pump out of the water
by pulling the power cord.
• Remove the pump from your pond
during frosty periods and clean it well
and store it in a dry place free from
frost.
• Your pump needs regular cleaning, see
page 10!
• There is no warranty on failures due to dirty pumps and scale build up inside the pump
caused by improper maintenance.
• Depending on usage the rotor of your pump can get worn out and damaged, this is
normal, new rotors can be purchased at your dealer.
Technical data
PondECO Plus
Voltage
Power
Capacity
Max. head of water
Connection
Cable length
Jet (m)
6
5
4
3
2
1
2
4
6
12000
220-240 V/50 Hz
135 W
10,850 l/h
3.40 m
40/32/25 mm
10 m
8
10
12
14
15000
220-240 V/50 Hz
157 W
14,800 l/h
4.50 m
40/32/25 mm
10 m
16
18
20
Flow (x 1000 l/h)
20000
220-240 V/50 Hz
220 W
18,500 l/h
5.50 m
40/32/25 mm
10 m
PondEco Plus 20000
PondEco Plus 15000
PondEco Plus 12000
3
Advertenties
