Replacing the grease filters
− Before replacing the grease filter, clean the edges of the
part in the extractor hood in which the filter is placed.
− Grasp the filter with 2 hands.
− Make sure that the lock or the lip on the filter is on the
bottom side.
− Insert the back of the filter in the opening, press the filter
upwards at the front and make sure it clicks tight.
You can obtain a new grease filter from a dealer
or the Novy website.
Article number grease filter: 7830.020 (2x).
3.3 Replacing the led lighting
First, remove the power supply from the hood
and allow the lighting to cool down sufficiently.
Open the glass plate and remove the grease filters from the
hood. You can reach the 2 LED spotlights at the bottom
of the hood with your hand.
3.3.1 Removing the LED spotlight:
A. First disconnect the cable leading to the LED spotlight
to be replaced. Disconnecting is done by releasing the
lock by applying a light pressure and pulling it off at
the same time.
B. Then remove the LED spotlight to be replaced by making
a soft rotating movement counterclockwise.
C. Remove the LED spotlight to be replaced from the
bayonet ring.
3.3.2 Mounting the new LED spotlight:
A. Place the new LED spotlight in the bayonet ring.
B. Make a rotating movement clockwise until the LED
spotlight is locked.
C. Connect the power cable.
3.3.3 Reassemble parts:
After this, you can reassemble everything in the reverse
order. Check if the grease filter(s) are properly fitted and
locked tightly. Then the electrical power can be put back
on the cooker hood.
3.4 Service
If there is a fault you can contact your (kitchen) supplier
and/or Novy Customer Service.
Belgium
Tel.: +32 (0)56 36 51 02
France
Tel.: +33 (0)3 20 94 06 62
Germany
Tel.: +49 (0)511 54 20 771
The Netherlands Tel.: +31 (0)88 011 91 10
Unite Kingdom
Tel.: +44 (0) 207 866 2493
For all other countries: your local installer or
Novy in Belgium: +32 (0)56 36 51 02
To be able to deal with the fault promptly and efficiently it
is necessary that the Repaired Service knows which type
of appliance you have.
You can find the type number on a sticker in
the inside of the extractor hood. This becomes
visible as soon as you take the filter out of the
extractor hood.
You can note the type number here:
– 31 –