Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Icon
+
+
Application with thermostat:
To see the set point;
The set key gives access to a quick menu where it is possible to see the following:
•
The setpoint value.
•
The actual setpoint value (rSE).
To change the set point;
1. Press and hold SET for 3 seconds until SET is displayed and the "°C" starts blinking
2.
Press SET again and the value of the setpoint will be displayed
3.
Increase or decrease the setpoint with the arrows
4. To remember the new setting value press 4 x SET or wait for 60 seconds
Note
•
If the Probe (P1) message appears on the screen, contact the Gamko service department or your supplier.
View the instruction on video: https://youtu.be/FIgvpGHDDHc
(Dimmable) LED lighting
The product is equipped with white LED lighting.
Depending on the type of product, the LED lighting
is dimmable in three strengths. If the product is
equipped with dimmable LED lighting, the dimmer
is located at the end of the LED strip and has a blue
light for recognition. Place a finger on the blue light
to decrease the brightness.
E3
Description
Hold for 3 seconds to release or lock the keypad.
• The "Off" label appears on the display and the keyboard is unlocked.
• The "On" label appears and the keypad is locked.
Return to ambient temperature display
31
Advertenties
Hoofdstukken
Inhoudsopgave
