Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2
assembly instructions
Before using the fan for the first time, please proceed as follows: carefully unpack the appliance and all components and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children. After
unpacking the appliance, check it for external damage that may have occurred during transport.
Assemble the fan in accordance with the instructions. Before assembling, determine the height at which you want to use the fan. This
affects the installation of the number of tubes.
COMPLETE ASSEMBLY
1. Start by attaching the footplate to the pedestal. Take a tube and place it in the opening of the footplate and fasten it.
2. Attach the next tube to the tube on the footplate.
3. Place the pedestal with the motor section on the tube.
4. Place the rear protective guard on the fan.
5. Fasten it by tightening the lock ring.
6. Insert the fan blade onto the fan. Test the fan blade by rotating it by hand. During rotation,
the blade should not create any friction with the lock ring. If it does, remove the fan and repeat all steps from the beginning.
7. Mount the fan blade with the fastening cap. Tighten the fastening cap by turning it to the left - counter-clockwise.
8. Place the front protective guard on the fan and use the clamps to attach it to the rear protective guard.
- Align the front protective guard with the rear protective guard using the positioning clamp on the bottom side in order to attach
both parts to each other properly. Use the bolt and nut at the top of the guards to fasten the guards to each other.
- Press the clamps [ b ] downwards in order to fasten the front and rear protective guards to each other.
Motor
3
2
1
12
•
English
4
5
Protective guard - rear
Tube
Footplate
a
Lock ring
6
Fan blade
b
b
b
Fastening cap
7
8
Protective guard - front
b
b
bolt and nut
Advertenties
Inhoudsopgave
