Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4
Service Menu
The Service menu of your Lukas is used to show you some hardware/software information and
perform small service operations. Let us take a look at all the Service menu options and what
each of them does.
S e r v i c e
L u k a s I D
I D: 1 2 3 4 A
S W V e r s i o n
V : 0 2 . 0 5 B 0 5
Up d a t e S W
R - S e l f t e s t
S - T e s t : P A S S
S e l f t e s t
S - T e s t : P A S S
User's manual
LUKAS II
Enter the Lukas menu by pressing the Volume-Down and
On/Off buttons together while the device is in powered off
state. From the options available choose [Service]. Press OK
button to confirm your choice.
The first menu is the [Lukas ID]. Press OK button to access
this menu. The device's serial number will be shown on the
screen; in this example '1234A'. The serial number of your
Lukas device is unique and especially important when you want
to get access to closed user group web casts. Through its ID code
a Lukas can identify itself and if the administrator has added your
Lukas in the list of allowed devices, then access is granted. This
happens automatically and is transparent to the user.
Press OK button to get back to the [Service] menu.
Your Lukas also shows you the version of software it is
running. This is available from the [SW Version] menu (press
OK to access it); in this example version 02.05 B05. It is
sometimes important for the technical support people at
Streamit (or your local dealer) to know this information, in order
to help you properly in case help is required.
Press OK button to get back to the [Service] menu.
The Lukas features Remote Software Update feature. The
[Update SW] feature is used to force your device to perform an
update check. If you press OK button for this option, the Lukas
will check for a new software version (also known as firmware)
and when a new version is available, the Lukas will update to
this version. The messages on the screen will change
according to the update progress.
Do NOT power off the Lukas during software updates, as
this can result in not functioning of the Lukas anymore.
The [R-Selftest] menu is used to shows the result of the last
selftest you performed on your Lukas, which must be PASS for
your device to operate properly. Press OK for the [R-Selftest]
menu to see the result of the last selftest.
Press OK button to get back to the [Service] menu.
The Selftest functionality has been designed to diagnose
quickly if there is hardware malfunction of your Lukas. Press
OK button to start the selftest; wait for the result.
Press OK button to get back to the [Service] menu.
For an accurate result of the selftest, it is important that
the device is fully switched off and on by releasing the power
Aug 2016
Version 2.0
11
Advertenties
Inhoudsopgave
