Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OTime-setting options
T here are 2 different time-setting options:
T i m e - s e t t i n g o p t i o n s
A hotplate should switch off automatically
■
Kitchen timer
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
Selecting the heat setting
1.
Touch the
symbol. The
0
2.
required hotplate lights up.
display.
Within the next 10 seconds slide your finger along
3.
the control panel repeatedly until the required
cooking time is reached.
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cooking
time of the hotplate selected is always displayed.
When the time has elapsed
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
lights up in the display for 10 seconds. The
lights up brightly. Touch any symbol. The displays go
out and the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the
display lights up brightly. Change the cooking time or
set to
‹‹
in the settings range.
Notes
The faster you slide your finger over the settings
■
range, the faster the minutes display counts forwards
or back. By tapping your finger, you stop the display
immediately.
You can set a cooking time of up to 99 minutes.
■
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
indicator for the
x
lights up on the timer
‹‹
‹‹
display
x
symbol. The
0
x
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 36
Note: You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates:
Select the hotplate and touch the
control panel change the cooking time or set to
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
If a hotplate has been selected, touch the
■
twice within 10 seconds.
If a hotplate has not been selected, touch the
■
symbol.
The
display lights up.
V
Setting the kitchen timer
Set the desired time in the settings range.
When the cooking time has elapsed
After the time has elapsed, you hear an audible signal.
lights up in the timer display. The
‹‹
kitchen timer lights up brightly. After 10 seconds, the
display switches off.
Displaying the time
Use the
symbol to select the kitchen timer. The time
0
is displayed for 10 seconds.
Changing the time
Use the
symbol to select the kitchen timer and reset
0
the time.
bAutomatic safety cut-out
I f a hotplate has been switched on for a long time
A u t o m a t i c s a f e t y c u t - o u t
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
Time-setting options
symbol. On the
0
‹‹
0
symbol
0
display for the
V
and the
/
residual
"‰
•
œ
en
.
35
Advertenties
Hoofdstukken
Inhoudsopgave
