Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Scope of delivery
1 x
Rollator
1 x
Pocket
1 x
Back support
1 x
Cane holder
1 x
Instructions for use
Safety instructions
• Use the rollator only as a walking aid!
• Use the rollator only on an even and solid surface.
• Rollator may not be used as a seat in vehicles, such as
a bus or train!
• It is prohibited to stand on the rollator or to transport a
person or animal on the rollator.
• Take note of the permitted maximum weight of the user.
This information can be found in the technical data in
these instructions for use as well as on the identifica-
tion plate.
• Use the tray only for small, lightweight objects which
are not sharp or hot. Max. load: 5.0 kg
• Use the basket only to transport objects and do not
overload it! Max. load: 5.0 kg
• Use on escalators and the like is expressly prohibited!
• Do not hang any bags on the handle – risk of tipping!
• On steep surfaces, use the service brake (pull the
brake lever upwards).
• Leaning excessively on the handles can cause the rol-
lator to tip backwards.
• When folding/unfolding the rollator, clothing and body
parts can be pinched.
• Protect the rollator from direct sunlight. Product parts
can become hot and cause skin injuries if touched.
• Prior to each use, ensure that your rollator is intact and
all adjustable parts are properly secured. Check that
the brakes are working properly!
• Before using the rollator, ensure that the folding guard
is properly locked.
• Check the screws on the rollator regularly and tighten,
if necessary.
• The braking effect can be impaired by wear and tear
on the tires. For this reason, check the braking effect
and tires regularly.
• The rollator should NOT be carried by the seat, remov-
able parts or the brake cables.
• Every serious incident which occurs in connection with
the product must be reported to the manufacturer and
Drive Medical GmbH & Co. KG | As per: 18.11.2022 | Errors and alterations excepted
the competent authority of the member state in which
the user and/or patient is located.
Assembly
• Take all the parts out of the box.
• Unfold the frame.
• Insert the castors, making sure that you position the
forks pointing outwards when the rollator is in motion.
• "R" label = right side
• "L" label = left side
Caution: Make sure that the two push-but-
tons are fully and properly engaged.
Straighten the frame and insert the rear wheels. Guide
the rear wheels inside through the folding mechanism so
that the bowden cables do not run outside of the frame.
If the brake pad is rubbing on the wheel, take the assem-
bly back off and unwind the cable a few turns. Adjust the
cable using the screw situated at the base and/or on the
handle side.
Unfolding
Place the rollator on ist wheels.
Now press both side rails of the seat section downward
until they click into place (pic. 1).
1
The rollator is unfolded correctl when both locking hooks
have clicked into place (pic. 2).
If it is difficult to engage the seat section while unfolding,
this can be remedied by applying a small film of grease to
the locking hooks.
Assembly of accessories
3
EN
2
2
The pocket is hung by its
loops from the ends of the
frame tubing.
11
Instructions for use NITRO SL
Advertenties
Hoofdstukken
Inhoudsopgave
