Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Before first use
Remove packaging, clean the interior of the
oven and the hob.
Take out and wash the oven fittings with
warm water and a little washing–up liquid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains and
wash carefully; the heating zones of the hob
should be heated for around 4 min. without
a pan.
Important!
In ovens equipped with the electronic
programmer Ts, the time „12.00" /
„0.00" will start flashing in the display
field upon connection to the power
supply.
The programmer should be set with
the current time. (See Electronic
programmer ). If the current time
is not set operation of the oven is
impossible.
The electronic prgrammer Ts is equipped
with electronic sensors which are
switched on by touching or pressing
the sensor surface for at least one
second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface clean
at all times.
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
19
Advertenties
Hoofdstukken
Inhoudsopgave
