Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6 Commissioning and operation
− Supply 24 Volt power supply and compressed air to the gun. Before first use, it is advisable
to set the compressed air to, for example, 2 Bar.
− The LED indicator on the gun blinks green rapidly during start-up. The gun is ready for use
after approx. 5 seconds; the LED indicator slowly flashes green 1x per 3 seconds (still alive).
− Take the gun in your hand and point it at the object to be cleaned while the trigger is
pressed. The LED indicator now lights up green continuously.
− The ionized air stream cleans and discharges the object within 1 second.
The ionization is only active when the trigger of the Cleanflex is pressed.
− Release the trigger once the entire object or surface has been cleaned and discharged.
− Adjust the rotatable gun head to one of the four desired positions by moving it with moderate
force by hand.
− The Cleanflex can be used in several ways:
− Pull down
The Cleanflex Easy can be mounted hanging from a balancer upside down at a work
station. The Cleanflex Easy can be hung with the supplied snap hook on the metal ring of
the Cleanflex Easy.
− Hand cleaner
The Cleanflex Easy can be used as a conventional hand air gun. The Cleanflex Easy can
be hung on its metal ring.
Pull down gun
Figure 6: positions in which the Cleanflex Easy can be used
CleanflexEasy_UM_9752050810_NL_D_GB_F_V2_1
Hand cleaner
GB
39
Advertenties
Hoofdstukken
Inhoudsopgave
