If charging does not start automatically, press the switch once.
Do not leave the device unattended during charging.
When the connected USB device is fully charged, switch off the power bank. Press the switch for approx. 2 seconds. Remove all cables from the
power bank, and replace the protective cap.
6.7 LED TORCH
To switch on the LED torch (Position 6 in the overview), quickly press the switch twice in succession (double-click). Press the switch again to select
the following functions of the torch: ON – dimmed – flashing. To switch the torch off, quickly press the switch twice in succession again.
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
When it is not in use, the power bank should be stored in a dry place. Do not expose the power bank to moisture, oil, dust, dirt, high temperatures,
excessive vibrations or mechanical stresses.
Storing the power bank for a long time at a low or freezing temperature will greatly reduce the battery performance. Bring the power bank to
room temperature before using it.
Charge the power bank every three months during periods of non-use.
7.2 CARE
Only use a soft cloth to clean the power bank. Do not use any aggressive cleaning agents or solvents. Never allow liquids to ingress into the
housing.
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must be collected separately and dis-
posed of in an environmentally responsible manner for recycling. Please contact your community or city administration regarding
disposal options for electrical and electronic scrap.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation
or other forms of reusing waste equipment!
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
9