Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius
degrees to Fahrenheit degrees.
Press the temperature adjustment buttons, then the screen will flash. When it is
flashing, you can set the desired temperature. The value will increase or decrease
1 degree at once. The temperature could be set between 30°C to 40°C (86°F to
104°F).
To lock or unlock the control panel, press the Lock button and hold 3 seconds.
Lock the control panel when you are away to prevent other people come to
change your settings.
Press the massage button to activate the bubble massage system, the green
indicator light turns on. It can be turned off by pressing it again.
Note:
- The massage system will stop automatically after 30 minutes of operation. Re-
activate the massage
function by pressing the massage button again.
- When filter button is on, pressing bubble button will exchange filter mode into
massage mode: filter indicator light will turn off and massage indicator light turn on.
If press the bubble button again, the massage mode will be changed back to filter
mode.
Press the filter button to activate the water filtration. The green indicator light will
turn on when the filtration system is activated.
Note: - If massage function is on, the filtration can't be activated.
Press the heating button to activate water heating and filtering system at the
same time. The green indicator light of filter and red indicator light of heating will
14
MSP-35101-V04
Advertenties
Inhoudsopgave
