Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Follow the below steps to assemble
the mat to the frame. Attach the
springs (5) as follows:
1.
Hook one end of a spring (5) into
a V-ring sewn on the jump mat.
2.
Hook the spring tool into the free
end of the spring (5). Pull it us-
ing the spring tool until it reaches
the frame.
3.
Push the end of the spring into a
hole in the frame.
4.
Unhook the spring tool. The
spring will be attached.
a. First place 8 V-rings at the white
coloured markings on the mat sepa-
rately on both sides of the T-joint and
attach 2 springs at #1 to both mat
and frame.
b. Then attach 2 springs at #2,
2 springs at #3 and 2 springs at #4
in the same way until 8 springs have
been attached. Make sure to count
the holes in the frame and V-rings of
the mat in the appropriate position.
c. Continue to attach 2 springs at #5,
#6, #7, #8 until the second 8 springs
have been attached. Be sure to match
#6, #7, #8 until the second 8 springs
the correct mat ring to the correct
frame hole. After these springs have
been attached, continue to attach
all remaining springs to the mat and
frame in any order.
Note: The spring has a large hook
which attaches to the frame and a
small hook which attaches to the
mat ring.
Safety Notice:
As you attach springs, care-
fully count the V-rings and frame
holes. If a V-ring or a hole is
skipped, reattach the spring in
the proper position.
WARNING!! : Please be careful where your hands and other parts of the
body are placed as the connector points and spring attachments can
create hand or body traps.
#8
#4
#7
match
#1 #2
10ft
1
12ft
1
14ft
1
Supreme
Trampolines
V-ring
V-Ring
V-ring
Anneau en V
5
#1
#3
#3
#4
#5
16
32
48
8
18
36
54
9
22
44
66
11
4
Frame
Rahmen
Frame
Châssis
#5
#2
#6
#6
#7
#8
24
40
56
27
45
63
33
55
77
17
Advertenties
Inhoudsopgave
