Advertenties
Beschikbare talen
Beschikbare talen
6.
RAPID COOLING
Shortcut key for rapid cooling mode. Temperature set to +3ᵒC (+38ᵒF), time set to 01:30 minutes. Select and
press start/stop key (3) to initiate.
NOTE: After a cooling program has ended, the appliance will enter preservation mode. This will keep the
product at set temperature. However, it is not recommended to store food inside the appliance for a long
period.
7.
CORE TEMPERATURE PROBE
When the appliance is switched off, remove the socket cover inside the chamber and plug the probe into
the socket (if not using the probe, please keep the socket covered). Insert the probe into the center of your
product and press this key to measure the core temperature. The core temperature will be displayed and
the probe icon will light up. Press again to switch back to temperature inside the chamber.
NOTE: For accurate measurements, make sure the tip section (A) of the probe is inserted into the center of
the product.
8.
DEEP FREEZE
During normal operation the appliance runs at target temperature inside the chamber only. When deep
freeze mode is activated the appliance will operate to achieve the target temperature inside the core of the
product (use of probe required). Press this key before you press the start/stop key (3) to activate. The deep
freeze icon will light up. Then press start/stop key to start the cooling cycle.
9.
DEFROST
Press to activate defrost function. The defrost indicator will light up. The defrost process is completed when
the indicator switches off.
10. TEMPERATURE DISPLAY
This screen displays the temperature value.
11. TIME DISPLAY
This screen displays the time value.
Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Core Temperature Probe
info@maximaholland.nl
-
www.maximaholland.com
Advertenties
