•
Both arm pads should be adjusted to the same height.
•
If the arm pads are correctly adjusted, the user must stand upright.
•
Always lock the stabilizing strap before applying load on the arm pads.
•
Failure to follow these warnings can result in personal injury.
Adjusting the length and angle of the push handles
- Unlock the pulling strap.
- Release the handle's length locking lever (2)
- Make adjustments to the desired length and angle, so it is easy and comfortable to hold the handle.
- Tighten the lever.
- Close the buckle.
Adjusting the angular rotation of the forearm support (optional)
- Unlock the pulling strap
- Release the arm pad's locking knob (1)
- Make adjustment to the desired angle to fit your personal comfort
- There are 3 possible angles to set: 0°, 22,5° en 45°
- Tighten the knob.
- Close the buckle.
- The small net bag can only be used for positions 0 ° and 22,5 °.
Using the hand brakes
- TO STOP THE ROLLATOR simply pull the brake levers rearwards towards hand grips.
- TO REMAIN STATIONARY hold brake handles in the "REAR" position.
-
The braking force can be increased by pulling the brake handles more firmly.
- TO START MOVING release the brake handles. They will move to the front automatically and
brakes will be released.
•
You should always engage the breaks when you don't plan to move the device.
•
Always engage the parking brakes before sitting on the rollator
•
Never leave the device on slopes without the breaks engaged!
•
Never sit too much to the rear. Do not to sit (partly) above the shopping bag.
•
Never lean backwards when seated on the rollator
Locking/Unlocking the hand brakes
- To lock the brakes push the brake handles forward until you can hear the "click" sound.
-
To unlock the brakes pull the brake handles backwards until you can feel them release.
•
When using the rollator in a stationary position, the hand brakes MUST always be locked.
7 Cleaning
General:
•
Clean the device regularly and keep it clean.
•
Lighter dirt and dust can be removed with a wet cloth.
•
Larger parts of dirt can be removed with a non-corroding, mild washing agent and warm water.
•
Do not use harsh abrasives or bleach based cleaners, as this may cause damage or
discolouration.
•
Dry parts with a soft cloth.
Wheels:
•
Clean wheels with warm water and a mild cleanser. Dry with a clean rag.
06 / 2019
5/29
NAVIGATOR