Download Inhoudsopgave Inhoud Print deze pagina

Identificatie Van De Onderdelen - Maxtec MaxO2ME Gebruikershandleiding

Verberg thumbnails Zie ook voor MaxO2ME:
Inhoudsopgave

Advertenties

4
22
6
1
10
7
15
20
13
12
1.2 Component Identification

1.2 Identificatie van de onderdelen

< 18% Alarm Indicator - The <18% alarm indicator is located above the Low Alarm
<18% Alarmindicator - De <18% alarmindicator bevindt zich boven de indicator Laagalarm. Als
1
1
Indicator digits. When the low alarm setting is set below <18%, the indicator will flash
de instelling Laagalarm onder 18% is ingesteld, zal de indicator elke seconde knipperen om de
each second to alert the operator of this special condition. See section 3.1.1 for setting
gebruiker te waarschuwen voor de bijzondere voorwaarde. Raadpleeg deel 3.1.1 om het laagalarm in
this low alarm condition.
te stellen.
2
Laagalarm LED - In een staat van laagalarm zal de gele LED "LOW ALARM" elke twee seconden
2
Low Alarm LED - In a low alarm condition, the yellow "LOW ALARM" LED will flash once
knipperen en een alarmgeluid weergegeven. Als het zuurstofgehalte lager dan 18% is, zal de rode
every two seconds, accompanied by the audio buzzer. If the Oxygen level is below 18%, the
LED "LOW ALARM" twee keer per seconde knipperen, samen met een zoemer.
red "LOW ALARM" LED will flash twice per second accompanied by the audio buzzer.
3
Hoogalarm LED - In een staat van hoogalarm zal de gele LED "HIGH ALARM" elke twee seconden
3
High Alarm LED - In a high alarm condition, the yellow "HIGH ALARM" LED will flash
knipperen en een alarmgeluid weergegeven.
once every two seconds accompanied by the audio buzzer.
4
3 1/2-digit display - De 3 1/2-digit liquid crystal display (LCD) verstrekt een rechtstreekse weergave
4
3 1/2-Digit Display - The 3 1/2 digit liquid crystal display (LCD) provides direct
van het zuurstofgehalte. De cijfers tonen ook foutcodes, instelmodi voor alarm en kalibratiecodes,
readout of oxygen concentrations. The digits also display error codes, alarm set
indien nodig.
modes and calibration codes as necessary.
5
%-symbool - Het "%"-teken bevindt zich rechts van het concentratiegetal en is tijdens normaal
bedrijf aanwezig.
5
% Symbol - The "%" sign is located to the right of the concentration number and is
6
Alarm gedempt/Smart Alarm - Als de toets Dempen wordt ingedrukt, verschijnt er op de display
present during normal operation.
om de gebruiker voor deze voorwaarde te waarschuwen. Als de knop Smart Alarm Mode wordt
6
Alarm Silence/Smart Alarm Indicator - When the silent key is pressed the indicator will
ingedrukt
display with cross bars
de indicator wordt weergegeven met T-balken
waarschuwen.
the indicator will display with T-bars to alert condition.
7
De indicator Batterij bijna leeg -
7
Low Battery Indicator -
het midden van het display en wordt alleen geactiveerd wanneer de spanning van de batterijen zich
the display and is only activated when the voltage on the batteries is below a normal
onder een normaal niveau bevindt.
operating level.
2
2
2
to alert condition. When Smart Alarm Mode Button is pressed
The low battery indicator is located at the middle of
BAT
866.4.Maxtec | www.maxtec.com
866.4.Maxtec
866.4.Maxtec www.maxtec.com
3
om de gebruiker voor deze voorwaarde te
De indicator Low Battery (batterij bijna leeg) bevindt zich in
www.maxtecinc.com
5
9
17
8
21
14
11
16
19
18
23

Advertenties

Inhoudsopgave
loading

Inhoudsopgave