10. Adjusting the back-pedal brake for children's bicycles
For children's bikes, it is advisable to check that the rear wheel does not turn stiffly
before use. If this is the case, the cause is often due to the back-pedal brake that is set
too tightly.
1.
The back-pedal brake is located at the rear wheel axle. It is attached to the frame
on the left side with a connection [A].
2.
Loosen the [B] screw of the connection.
3.
Turn the connection back one turn, counter-clockwise.
4.
Re-attach the connection.
11. Lubricant
Bearings of naves, head tube and pedal axle are already greased in the factory and we advise you to grease these
regular. To grease these bearings, the parts have to be dismantled. This better can be done by a bicycle service shop.
This also applies to the chain or the navelining and brake cable directions.
12. Camshaft wheels
Note: The wheels must be checked before you start using the bike. By adjusting the spokes, you prevent pulsing in the
wheel. Use a spoke wrench to do this.
1.
Check that all spokes are evenly tensioned by lightly squeezing two spokes.
2.
If one or more spokes are not evenly tensioned, they should be tightened.
3.
Tighten the loose spokes by half a turn and check again.
4.
Wait a month and then check all the spokes again.
Warranty
It contains the legal warranty. Damages, which are created by wrong requirements, force, insufficient maintenance or
by normal wastage, are locked out of warranty.
1.
10-year warranty on the frame and fork.
2.
Five year warranty on the paintwork on rusting from the inside.
3.
One-year warranty on all parts except the tires.