Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2
INTRODUCTION
2.1
Purpose
These electrical heaters have a axial fan
and are made for a flexible indoor
installation.
2.2
Principle of operation
The TBD 18 Heaters are mounted on a
frame for easy transportation.
Heating elemants are mounted in the
rotatable housing. The fan blows air accross
the heating elements.
The heater will switch off when
overheated. Overheating will occur when
the air flow is too low or when
environment temperature is to high. Once
it has cooled down, the heater will switch
on automatically (automatic reset).
2.3
Main components (Fig. 1)
A
Pushbar
B
Operating panel
C
Identification plate
D
Controlbox
E
Heating Elements
F
Airflow direction
G
Wheel
H
5-pin-plug.
I
Fan
2.4
Maximum thermostat
The heater a number of inbuilt maximum
thermostats that switch off the heater when
the maximum permissible temperature of
the hot air is exceeded.
2.5
Control thermostat
The heater has a control thermostat that
switches off the heater when the set
maximum ambient temperature is reached.
TBD 18/ TBD 18 PC
THERMOBILE
2.6
The heater has a control thermostat (D) and
3 rocker switches (A,B,C) for ventilation and
heating. The TBD18 has two 9kW switches.
If both swiches are turned on the heater
delivers a heat output of 18kW.
A
B
C
D
E
2.7
Allways check the heaters airflow direction
(fig.1 F). De fan has to blow the air accross
the heating elements.
40.017.069 rev01 – 2022
Operating panel (Fig. 4)
Ventilation switch
0 = Fan off
1 = Fan on
Heating switch
0 = Additional heating off
1 = Additional
Second heating switch
0 = Additional heating off
1 = Additional
Control thermostat 20 - 67.5°c
(Room thermostat optional)
Airflow
heating on
heating on
12
Advertenties
Hoofdstukken
Inhoudsopgave
