Advertenties
Beschikbare talen
Beschikbare talen
1.
Choose a suitable size Tube Roll.
2.
Create a bag from the tube by sealing the open end first. Then measure the tube to the size of your product,
add +/- 5 cm extra and cut the Tube Roll.
3.
Place your product inside the bag and follow the steps mentioned in chapter "When using Vacuum Bags"
above.
TIP! When packaging delicate items use the "Pulse" function. This allows you to regulate vacuum pressure. Press
"Pulse" once to activate this function and press and hold to start vacuum process Release button to stop vacuum
process when required. Finally, press "Seal" to seal your bag.
1.
Only use containers designed for vacuum packaging.
2.
Place product inside container (do not overfill).
3.
Place lid on container (make sure the lid is clean and dry) and turn de valve into the "Vacuum" position.
4.
Attach the vacuum hose to the valve and attach the opposite end of the hose to the accessory port on the
machine.
5.
Press "Accessory" button while slightly pressing down the container lid for +/- 3 seconds to start the vacuum
process. The countdown will start and the machine will beep when the process is completed.
6.
When the vacuum process is complete, turn the valve to the "Lock" position and remove the hose. Store the
container in the refrigerator.
7.
To open the container turn the valve to the "Open" position and remove the lid.
ATTENTION! Do not freeze, over time this will cause vacuum loss.
MAXIMA | Nijverheidsweg 23 A/D | 3641 RP Mijdrecht | The Netherlands
When using a Tube Roll:
When using Vacuum Containers:
T: +31 (0) 297 253 969 |
info@maxima.com
|
www.maxima.com
Advertenties
