Advertenties
Beschikbare talen
Beschikbare talen
2.
Level: There are 3 levels to choose, High, Medium and Low. This option will determine how bright the display's
backlight is lit when the radio is operating.
Language
There are multiple languages available for the menu: English, German, French, Norwegian, Italian, Swedish, Danish, Polish,
Finnish.
Factory reset
You can reset the radio to the factory default any time. Once a reset has been done, all previous settings and preset will be
erased and the radio will resume to DAB mode.
System Version
Press to see the firmware version.
Please note if there is not any operation in 10 seconds, the radio will return to last playing mode.
Note: To exit / return to the last menu level, press the <INFO/MENU> button.
While the radio is in FM mode, press and hold the <INFO/MENU> button on the radio to enter the main menu.
Scan setting
There are two types of scan available. The scan is carried out according to "Strong station" or "All station". If "Strong station"
is selected, it will scan only the channels with strong reception signal where the radio is placed. If "All station" is selected, it
will scan out both the strong and weak channels.
Audio setting
You can choose to have "Mono" or "Stereo". If the signal is weak and stable stereo reception is not possible, select "Mono"
have better reception. When a FM station is playing, press the <TUNE/SELECT> button can access to change the audio setting.
When it appears with, it means it's stereo. To select Mono, press <TUNE/SELECT> again. The icon will disappear, and it means
Mono is selected.
Additional system settings
The options available are same as in DAB mode (except for "manual tune" and "prune invalid"). Please refer to the DAB
section as described above.
If you are experiencing problems with your DAB radio there are some quick and easy checks that you can do, which may help
to solve the problem.
Radio not turning on/not working
- Connect the USB cable to charge the battery and try powering on the radio again.
No DAB reception
- Please carry out "Factory Reset" on the radio and adjust the length and direction of the antenna.
- Move the radio close to the window.
- Carry out Full Scan again from the Main menu (Press and hold the Info/Menu button).
Radio reception is poor
- Please adjust the length and direction of the antenna to improve reception.
- Check that you do not have other electrical equipment too close to your radio, causing interference.
No sound
- Adjust the volume level.
- Please change other radio channels and see if there is sound. It could be the reception issue or the broadcasting problem
which does not have sound.
8
Advertenties
