Basic Settings; Changing Basic Settings; Overview Of The Basic Settings; Cleaning And Servicing - NEFF T1 B22 Series Gebruikershandleiding En Installatie-Instructies
Verberg thumbnails
Zie ook voor T1 B22 Series:
- Gebruiksaanwijzing (56 pagina's) ,
- Gebruikershandleiding (48 pagina's) ,
- Gebruikershandleiding (48 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Basic settings
9 Basic settings
Ba s i c s e t t i n gs
You can configure the basic settings for your appliance
to meet your needs.
9.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
Automatic timer
- Switched off.
-
- Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10 seconds.
– 30 seconds.
– 1 minute.
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
1
hotplate.
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
1
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched off.
– Switched on.
1
Factory setting
10 Cleaning and servicing
Cl e a n i n g a n d s e r v i c i n g
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
36
1
1
1
1
1
9.2 Changing basic settings
Requirement: The hob is switched off.
1.
Switch on the hob.
2.
Within the next 10 seconds press and hold
approx. 4 seconds.
and
flash alternately on the left-hand display.
a
lights up on the right-hand display.
a
3.
Repeatedly touch
pears on the left-hand display.
4.
Use
or
to set the required value.
5.
Press and hold
a The setting is activated.
Tip: To exit the basic settings without saving, switch off
the hob using
. Switch the hob on again and reset.
10.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, the online shop or a
retailer.
until the required indicator ap-
for 4 seconds.
for
Advertenties
Hoofdstukken
Inhoudsopgave
