Inhoudsopgave
Advertenties
sides.
4. Put the ergometer back in upright position.
M967900 - MANUAL ANGIO SINGLE SET / VERSION: 1.0 - 2017-02-23
To make sure that connectors
are not damaged through
pulling them, you need to use
the strain relief.
1. Place the ergometer on its
side.
2. Remove the strain relief by
pushing the arms in the cavity
inwards.
3. Lead the wires through the
holes in the strain relief as
shown in the picture and place
it back in the ergometer.
Note. There is place for the
thick AC cord in the middle and
2 other thinner cables on the
13/21
Advertenties
Inhoudsopgave
