Download Inhoudsopgave Inhoud Print deze pagina

Appliance Description; Before The First Use; Steam Ironing; Filling The Reservoir - Inventum HS422CG Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

2

appliance description

1.
Lid
2.
Steam selector
3.
Shot steam button
4.
Spray button
5.
Handle
6.
Control light
7.
Temperature
8.
Water reservoir
9.
Self clean button
10. Plate
Cup
3
before the first use
Before you use the appliance for the first time, please do
as follows: Unpack the appliance carefully and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children.
Check the appliance after unpacking for any visible damage, that
could be caused by transportation. Do not use the appliance if
there are visible signs of damage.
When using the iron for the first time, you may notice a slight
emission of smoke and hear some sounds made by the
expanding plastics. This is quite normal and it stops after a short
time.
4

steam ironing

Sort the laundry to be ironed according to the international
symbols on the garment label, or if this is missing, according to
the type of fabric.
Garment
Type of fabric
label
synthetic
silk - wool
coton - linen
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat
up than to cool down) and eliminates the risk of scorching the
fabric.
English
10
2
1
8
10
Temperature setting
low temperature
••
medium temperature
•••
high temperature
do not iron
4
3 6
5
filling the reservoir
Check that the plug is disconnected from
the socket.
Move the steam selector to
Open the lid and slowly pour the water into
the reservoir using the special measure
cup. Take care not to go over the maximum
level (about 260 ml) indicated by MAX on
the reservoir.
Close the lid.

selecting the temperature

Put the iron in a vertical position and put the plug in the socket.
Adjust the temperature knob according to the international
symbol on the garment label.
The control light indicates that the iron is heating up. Wait until
the control light goes off before ironing.
Warning: during ironing, the control light comes on at intervals,
indicating that the selected temperature is maintained. If
you lower the thermostat temperature after ironing at a high
temperature, do not start ironing until the control light comes
on again.

selecting the quantity of steam

The quantity of steam is regulated by the steam selector.
Move the steam selector to a position between minimum and
maximum depending on the quantity of steam required and the
temperature selected.
Warning: the iron gives off steam continuously only if you hold
the iron horizontally. You can stop the continuous steam by
placing the iron in a vertical position or by moving the steam
selector to
.
As indicated on the thermostat knob and in the initial table, you
can only use steam at the highest temperatures. If the selected
temperature is too low, water may drip from the plate.
7
9
.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave