Polssteuneenheid; Removing The Palmrest Assembly - Dell Latitude 3410 Servicehandleiding
Verberg thumbnails
Zie ook voor Latitude 3410:
- Onderhoudshandleiding (107 pagina's) ,
- Handleiding (43 pagina's)
Inhoudsopgave
Advertenties
Polssteuneenheid
Removing the Palmrest Assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
WLAN
card.
6. Remove the
coin-cell
battery.
7. Remove the
memory
modules.
8. Remove the DC-in.
9. Remove the
solid state
10. Remove the
hard
drive.
11. Remove the touchpad.
12. Remove the speakers.
13. Remove the heatsink.
14. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
About this task
The figure indicates the location of the Palmrest Assembly and provides a visual representation of the removal procedure.
Steps
Once the required parts are removed, the bare palmrest assembly can be accessed and removed.
Next steps
1. Install the
system board
2. Install the heatsink.
before working inside your
drive.
computer.
Demonteren en hermonteren
65
Advertenties
Inhoudsopgave
