Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7
9
11
INSTALLING THE COOKER HOOD TO A DUCT
1 Hold the cooker hood against the wall on a minimum height of 65 cm above the cooker and mark the bottom of the cooker hood
on the wall.
Measure with a tapeline the actual width of the cooker hood and calculate the middle. For example: 90 cm wide : 2 = 45 cm.
Do the same with your cooker so you can mount the cooker hood in the center above the cooker. Mark the middle on the wall at
the level of the bottom marking of the cooker hood.
Remove the grease filters. In the exposed interior you will find two holes to properly mount the cooker hood. Mark these holes on
the wall.
2 Drill with a masonry drill of Ø8mm the two marked holes.
3 Insert the plugs and fit the screws. Let the screws protrude 10 mm.
4 Hold the bracket for the inner chimney at the desired height on the wall. Mark the holes for the bracket. Drill the markes holes
and insert the plugs.
Fit the bracket for the inner chimney with two screws to the wall.
5 Drill a hole with a diameter of 160 mm in the wall to the outside. Make sure the hole is positioned at least 1 cm below the fitted
24
•
English
8
10
* Only when using the starter kit for recirculation
12
Advertenties
Inhoudsopgave
