EN
Drip tray
The device is equipped with a removable and variable drip tray. Depending the cup size used, the drip tray can be
placed on 2 different heights. The difference between the 2 heights is 7 cm.
When the drip trap is mounted on the lowest position 8A, the available space between the drip tray and spout =
17 cm.
When the drip trap is mounted on the highest position 8B, the available space between the drip tray and spout =
10 cm.
When the drip tray is full, hold the service on top, and remove the drip tray by moving it upwards, releasing it from
the drip tray holders. a dry cloth and place it back at the desired height, sliding it over the drip tray holders 8A or
8B with a gentle push.
4) CLEANING AND MAINTENANCE
Descaling
To maintain its performance, it is recommended to descale the device on a monthly basis in case of regular use.
On use a toxic free detergent such as citric acid or vinegar!
Pour some citric acid or vinegar into the water tank. Dispense the liquid until the tank is empty.
Repeat this a couple of times, to get rid of the scale completely.
After completion, the water tank and device need to be cleaned.
Pour out all boiled water and add pure water. Dispense the water until the tank is empty.
Repeat this two or few more times, each time with new fresh water, before you consume the dispensed water.
Important notice!
Once the device reaches a cumulative use of 10 hours, the green light
at
will flash on the dispenser to remind you to descale the device.
After descaling: Press the power ON/OFF button
for 5 seconds to unlock the descaling light indicator.
The green light will stop flashing and the device is ready for use.
Cleaning and maintenance
• Remove the plug from the power socket and allow the device to fully cool down.
• Never immerse the device in water or any other liquid.
• Clean the device after each use.
• Clean the casing and insides with a damp cloth.
• Do not use any washing up liquids in the water tank!
7