Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.
For pools using hose connection of Ø 57 mm
a) Detach the pool return hose from your pump/filter.
b) Use soft hose of either Ø32mm (1 1/4in) or Ø38mm (1 1/2in) or to connect the center hose connector to
the pump/filter. Make sure the hose is secured by the hose clamp.
c) Screw the threaded nut hose connector to the side hose connector. Make sure the O ring is inside the
threaded nut hose connector.
d) Screw the threaded nut of the hose, which is connected to the pool return inlet, to the threaded nut hose
connector. Make sure the flat gasket is placed between threaded nut hose connector and hose threaded
nut.
(2¼")
19
Advertenties
Inhoudsopgave
Probleemoplossen
