Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
COMPONENTS (SEE PAGE 2)
Control Panel
1
LED display
2
Front grille
3
Back grille
4
Base
5
CONTROL PANEL (SEE PAGE 3)
Bouton [ POWER ]
1
Bouton [ SPEED ]
2
Bouton [ MODE ]
3
Bouton [TIMER]
4
Bouton [ OSC ]
5
USE PRECAUTIONS
• Make sure that the product is placed on a dry flat surface.
• Leave at least 50cm behind, around and in front of the appliance.
ASSEMBLY INSTRUCTIONS
The base of the fan has two parts which fit around the tower.
1. Put the two parts of the base together; be aware to put the power cord in the center hole
before assembling it.
2. Place the base in the right way aligning it with the mark placed on the tower (
3. Attach the base to the tower by putting the screws in the holes.
4. Block the power cord in the cut-out (
MAINTENANCE
• Make sure the unit is turned off and unplugged before any manipulation.
• Do not immerse the device in water or any other liquid.
• Do not use corrosive, abrasive or flammable products to clean the unit.
• Use a soft fabric or cloth for general cleaning. To remove more persistent dirt or dust, use a
soapy wet cloth. Do not use any solvent that could damage the plastic of the fan.
10
Power cord
6
Transport handle
7
Remote control compartment
8
Remote control
9
REMOTE CONTROL (SEE PAGE 2)
The remote control is included with a button
cell battery (the type of battery CR2025).
All the functions can be performed with the
remote control. This remote control ope-
rates like the control panel.
).
2
MAIN FUNCTIONS
[POWER] BUTTON : Turn the fan on by pressing the POWER button; turn the fan off by pres-
sing the POWER button a second time.
[SPEED] BUTTON : By pressing SPEED you can adjust the speed with 3 air flow intensities: low,
medium, or high (indicated
[MODE] BUTTON : By pressing the MODE button you can choose between 3 different modes:
– "NORMAL" Mode (indicated
– "NATURAL WIND" Mode : It alternates different kinds of speed to create a natural airflow
(indicated
– "SLEEP" Mode : The fan stays in low speed, the LED display switches off after 20 sec. press
any button to turn on the LED (indicated
[TIMER] BUTTON : The fan is equipped with a timer. You can program its stop from 1 hour to
12 hours. Press several times the button until the time appears, the LED display switches off
after 20 sec; press any button to turn on the LED display again (indicated
display).
[OSC] BUTTON : Pressing the OSC button will start and stop the oscillation function (indi-
cated
F
FAQ
Problem
The appliance
does not work
).
1
Drop in the
appliance
performance
Abnormal noise
on the LED display).
B
on the LED display).
C
on the LED display).
D
on the LED display).
E
on the LED display).
Reason
> The product is not correctly
plug or there is an electrical
problem.
> There is a problem on the
electrical system of your
house.
> The air inlet or outlet is
blocked by something.
> Something obstructs the
fan.
> The device has a
functioning problem.
on the LED
A
Solution
> Plug the socket correctly and
check the voltage and the good
functioning of your electrical
system.
> Leave at least 50 cm space
behind, on the sides and in front
of the unit.
> Make sure that no object
obstructs the air flow.
> Contact your reseller for service
support.
11
Advertenties
Inhoudsopgave
