Makita 9561CR Gebruiksaanwijzing pagina 12
Verberg thumbnails
Zie ook voor 9561CR:
- Gebruiksaanwijzing (76 pagina's) ,
- Gebruiksaanwijzing (69 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Sound power level (L
Uncertainty (K): 3 dB (A) Wear ear
protection.
Vibration
The vibration total value (tri-axial
ENG900-1
vector sum) determined according to EN60745:
Model 9561CR/CVR, 9562CR/CVR
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 9564CR/CVR
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 9565CR/CVR
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool with
another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration
emission value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
12
): 93 dB (A)
WA
2
): 8.5 m/s
h,AG
2
2
): 7.5 m/s
h,AG
2
2
): 8.0 m/s
h,AG
2
2
): 8.0 m/s
h,AG
2
2
): 8.0 m/s
h,AG
2
2
): 7.5 m/s
h,AG
2
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in
addition to the trigger time).
For European countries only
EC Declaration of Conformity We Makita
Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: 9561CR/CVR, 9562CR/CVR,
9564CR/CVR, 9565CR/CVR
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents: EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
ENG902-1
30. 1. 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENH101-15
Advertenties
Inhoudsopgave
