Quax Trendy 54 01 41 Series Handboek pagina 35

Inhoudsopgave

Advertenties

Beschikbare talen

TRENDY

54 01 41xx

4. Assembling the babybed

Needed parts : the leg parts 5, 6 and 7A/B, both end panels 2, both sides 1, both bottom panels 4 and

the bottom 3

Step 1 : Use both long crossbars 6, both short crossbars 5, eight eccentrics H, the four legs 7A and 7B

and eight connectors G

Push two eccentrics (H) in the provided drillings on the inside of the long crossbars (6) and the short cross-

bars (5). Tighten two connectors (G) in the provided holes on the inside of the legs (7A and 7B).

Step 2 : Use the parts of step 1

Push a leg (7A and 7B) with its connectors into the holes and over the wooden dowels of short crossbars

(5). Tighten the eccentrics. Push the leg frame with his connectors in the drillings and on the wooden do-

wels of the long crossbars (6). Tighten the eccentrics. Repeat with the other leg frame.

Omvormbaar bed 120x60 cm

Konvertierbar Bett 120x60 cm

Lit convertible 120x60 cm

Convertible bed 120x60 cm

Quax

First dreams

First steps

Advertenties

Inhoudsopgave