Download Print deze pagina

Maintenance Instructions - Evolar EVO-29T Installatie- En Bedieningshandleiding

Advertenties

Beschikbare talen

Beschikbare talen

OPERATION INSTRUCTIONS
FAN SPEED CONTROLL (ON/OFF & SPEED)
Use the position switch to switch on / off and adjust the speed of
the fan. Turn the rotary switch to ON to switch on the fan. The fan
has four positions: 0 = off,
TIMER
Use the rotary knob to switch on the fan via timer. After setting, the
fan will operate for te set time. The fan can be switched off again by
turning the rotary switch to OFF.

MAINTENANCE INSTRUCTIONS

The fan requires little maintenance. Do not attempt to repair the fan yourself. If the fan is damaged
or damaged, contact the supplier or go to an authorized repair company.
MAINTENANCE:
7. Disconnect the fan from the power supply before cleaning, assembling or disassembling the
fan.
8. To ensure adequate air circulation to the motor, keep vents at the rear of the motor housing
room dust and dirt free. You can use a vacuum cleaner to clean these vents. Always remove
the plug from the power socket before cleaning the fan. Don't dissemble the fan to remove
the dust.
9. Wipe the outer ports with a soft cloth soaking. Do not use abrasive detergent or solvents to
avoid scratching the surface.
10. Do not allow water or any other liquid in to the motor housing or interior parts.
11. If the power cord is damaged, the fan cannot be used at all times. Request a specialist to repair
the fan.
12. Never replace parts on the fan.
SUPPORT
All available information and parts can be found on
1 = low, 2 = medium, 3 = high.
www.evolar.nl

Advertenties

loading