Inhoudsopgave
Advertenties
An
Ao
Stabiliteits controle en handmatige
Ap
Aq
Controle Hi-Lo signaal,nul waarde,
Hi limit wegen, Lo limit wegen,
Hi limit voor tellen,Lo limiet voor het
tellen
Auto tarra, repeterende
tarra en preset tarra
tarra
Automatisch uitschakeltijd,
backlight,
kleur ratio, toetsen
geluid en systeem
zoemer
46
© Riba Weegtechniek B.V.
d2
= manual zero range: - 0 = 1%;
1 = 2%; 2 = 3%; 3 = 4%; 4 = 5%;
5 = 10%; 6 = 20%; 7 = 50%; 8 =
75%; 9 = 100%
d3
= auto zero tracking speed: -
00 = Off; 01 = 0.25e; 02 = 0.50e;
03 = 10e; 04 = 1.5e; 05 = 2.0e; 06
= 2.5e; 07 = 3.0e; ....; 09 = 5e; 10
= 7.5e; 11 = 10e
d1
= auto tare: - 0 = Off; 1 = On;
2= Continuous
d2
= repetitive tare: - 0 = Off; 1 =
On
d3
= Preset tare: - 0 = Off; 1 = On
d1= manual zero stability control:
- 0 = no (disable); 1 = Yes
(enable)
d2= manual tare stability control: -
0 = no (disable); 1 = Yes (enable)
d1
= auto power off time: - 0 = Off;
1 = 1 minute; 2 = 3 minute; 3 = 5
minute; 4 = 10 minute; 5 = 20
minute
d2
= backlight brightness (01 ~
99). 01 = lowest, 99 = highest
d3
= color ratio (01 ~ 99). 01 =
least red output, 99 = highest red
output
d4
= keypad buzzer: - 0 = Off; 1 =
On
d5
= system buzzer: - 0 = Off; 1 =
On
d1
= check result buzzer: - 0 =Off;
1 = In; 2 = Out; 3 = hi, 4 = lo
d2
= near zero value Data length=
8 with leading space(Hex code
20)
d3
= Hi Limit for weighing. Integer
only. Data length = 8 including
decimal with leading space (Hex
code 20).
d4
= Lo Limit for weighing. Integer
only. Data length = 8 including
decimal with leading space (Hex
code 20).
d5
= Hi Limit for counting. Integer
only. Data length = 8 (integers
only) with leading space (Hex
code 20).
d6
= Lo Limit for counting. Integer
only. Data length = 8 (integers
only) with leading space (Hex
Advertenties
Inhoudsopgave
