Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LED's light
06) Conformity of the product
The warranty expires in the event of damage due to non-compliance with the
safety instructions of the device. Furthermore, we are not liable for
consequential damage, damage to objects or persons resulting from failure to
observe the safety instructions and improper use/handling of the device due to
wear and tear. Product design and specifications are subject to change without
notice. All logos and trade names are registered trademarks of their respective
owners and are hereby acknowledged as such.
07) Storage of the Manual
Please read the operating instructions carefully and completely before use.
The operating instructions are part of the product, they contain important
information on the commissioning and handling of the device. Keep all enclosed
operating instructions for future reference. If the device is sold or passed on to
third parties, you are obliged to pass on the operating instructions as these are
lawfully part of the product.
08) Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of
the product. If damaged, it must not be put into operation. Installation:
Assemble the frame as shown in the enclosed pictures (Fig. 02 step 1 through 6)
and place the product on a stable surface, plug it into the wall socket and use
the manual switch to turn it on (For technical data, please refer to table 1).
09) Operating the product
The safety instructions and warnings must be observed to ensure both the
perfect condition of the product and safe operation. These LED's produce the
correct light spectrum for natural photosynthesis for your plants, which results
in a natural and rapid growth. Apart from that, this LED lamp has a very high CRI
(colour rendering index) and the neutral white light (3.500K) results in a natural
light rendering. This LED mini grow garden has an automatic timer. When you
turn on the light, the LED's automatically stay on for 16 hours and then switch
off for 8 hours (cycle). This conforms to the biological cycle of the plant and it
saves power. When the lamp is turned on but the LED's are off, the red light
(Fig. 1 ) on the PCB lights up, which enables you to check the working
condition of the product.
6
Advertenties
Hoofdstukken
Inhoudsopgave
