Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit
during operation and keep it out of reach of children or animals. This product is not a toy,
LED lights are extremely bright and looking directly at the light source during operation can
lead to serious eye damage. Any other use of the device than described in the manual may
damage the product or cause danger to the user, e.g. due to a short circuit, fire or electric
shock. The safety instructions must be observed at all times.
06 Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety in-
structions of the device. Furthermore, we are not liable for consequential damage, damage
to objects or persons resulting from failure to observe the safety instructions and improper
use/handling of the device due to wear and tear. Product design and specifications are sub-
ject to change without notice. All logos and trade names are registered trademarks of their
respective owners and are hereby acknowledged as such.
07 Storage of the Manual
Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the commission-
ing and handling of the device. Keep all enclosed operating instructions for future reference.
If the device is sold or passed on to third parties, you are obliged to pass on the operating
instructions as these are lawfully part of the product.
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of the product.
If damaged, it must not be put into operation. This product may only be installed by a quali-
fied technician.
Installation:
1. Decide where to mount the luminaire.
2. Disconnect the main power supply.
3. Secure against being switched on again.
4. Verify that there is no voltage to your cable.
5. Follow the enclosed steps.
6. Check all connections.
7. Reconnect the main power.
Select the correct mode:
Switch 1x = 100%
Switch 2x = 50%
Switch 3x = 10%
09 Operating the product
The safety instructions and warnings must be observed to ensure both the perfect condition
of the product and safe operation.
10 Product maintenance
The switch to dim LED ceiling light can be cleaned with clear water and a soft cloth. Do not
use detergents containing surface active agents or scouring agents.
5
Advertenties
Inhoudsopgave
