Inhoudsopgave
Advertenties
4.
Aansluitschema
Dit aansluitschema is een voorbeeld van hoe de verschillende systemen (Mk9 en Mk10) kunnen
worden geïnstalleerd.
Mk9 CO2-sensor
Mk9 CO2-sensor
ALERT
ALERT
The CO2 level is over 5000 ppm. No danger - but the CO2 is
The CO2 level is over 5000 ppm. No danger - but the CO2 is
There is a small CO2 leak that has lasted for over 8 hours. If the leak is
There is a small CO2 leak that has lasted for over 8 hours. If the leak is
5 000 ppm/8 h TWA (Time Weighted Average)
5 000 ppm/8 h TWA
W W (Time Weighted Average)
(Permissible Exposure Limit).
(Permissible Exposure Limit).
Open the back door and Call Service. There is a CO2 leak.
Open the back door and Call Service. There is a CO2 leak.
Service technician should remedy the problem under the supervision
Service technician should remedy the problem under the supervision
15 000 ppm/1.5% CO2.
15 000 ppm/1.5% CO2.
Evacuate room
Evacuate room
Call Fire Department
Call Fire Department
30 000 ppm/3.0% CO2
30 000 ppm/3.0% CO2
s self-diagnostics Alert.
s self-diagnostics Alert.
y. Call Service.
y. Call Service.
Mogelijkheid om uit te
Mogelijkheid om uit te
breiden met max. acht
breiden met max. acht
Mk9/Mk10 CO2-sensoren
Mk9/Mk10 CO2-sensoren
Opmerking:
bij elk extra CO-sensorpakket zit een installatiehandleiding met uitleg over een eenvoudige
installatieprocedure om extra sensoren toe te voegen aan een bestaande set.
Mk10 CO2-sensor
Mk10 CO2-sensor
A A
RJ45-splitter (rood)
RJ45-splitter (rood)
1-1/1-2/1-4
1-1/1-2/1-4
RJ45-splitter (blauw)
RJ45-splitter (blauw)
1-1/1-2/1-4
1-1/1-2/1-4
Voeding
Voeding
Afstandsbediening
Afstandsbediening
Claxon/knipperlicht
Claxon/knipperlicht
WARNING
WARNIN
!
!
DO NOT ENTER T
DO NOT ENTER THIS AREA WHEN SIREN
IS SOUNDING AND LIGHT IS FLASHING!
IS SOUNDING AN
Emergency A
Emergency Actions
• Evacuate the Area Immediately.
• Evacuate th
• Call the Fire
• Call the Fire Department from
CO
CO
ALERT
ALERT
2
2
Non-Emergen
Non-Emergency Action
• If light only is flashing,
• If light only
WARNING
WARNIN
!
!
DO NOT ENTER T
DO NOT ENTER THIS AREA WHEN SIREN
IS SOUNDING AND LIGHT IS FLASHING!
IS SOUNDING AN
Emergency Actions
Emergency A
• Evacuate the Area Immediately.
• Evacuate th
• Call the Fir
• Call the Fire Department from
CO
CO
ALERT
ALERT
2
2
Non-Emergen
Non-Emergency Action
• If light only
• If light only is flashing,
Mk9 centrale eenheid
Mk9 centrale eenheid
1. Keep Calm!
1. Keep Calm!
2. If you have a MK9 Set, turn off
2. If you have a MK9 Set, turn off the buzzer in the Central Unit by pressing the RESET button
3. Check the type of alarm and which Sensor is giving the alarm by following the instructions below.
3. Check the type of alarm and w
INDICATION
INDICATION
Central Unit:
Central Unit:
The red diode is ON
The red diode is ON
Constant sound signal
Constant sound signal
Displa
Displa
Sens
Sens
ALARM
ALARM
Central
Central
The
The
Beeping
Beeping
Displa
Displa
Sens
Sens
ALARM
ALARM
Central
Central
The
The
Beeping
Beeping
Displa
Displa
Sens
Sens
ALARM
ALARM
CO2-Sen
CO2-Sen
Beeping
Beeping
5 s
5 s
Displa
Displa
High
High
Central
Central
The
The
Beeping
Beeping
Displa
Displa
Sens
Sens
inf
inf
After an
After an
system
system
To insur
To insur
warning
warning
function
function
Senso
Senso
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
!
CARBON
CARBON DIOXIDE GAS
outside of t
outside of the building.
call CO2 Service at:
call CO2 Se
!
CARBON
CARBON DIOXIDE GAS
outside of the building.
outside of t
call CO2 Service at:
call CO2 Se
CO2 S
CO2 Safety System – Mk9
What
What to do in case of an ALARM?
on the front.
CAUSE
ACTION
HIGH-ALARM
DO NOT ENTER
the risk zone.
!
Evacuate the area.
TAKE PRECAUTIONS
Call the fire department.
High concentration of CO2
LOW-ALARM
A service technician should
only enter the room under the
High concentration of CO2
supervision of another person.
Open the doors and the windows
as much as possible.
Open the doors and the windows
TWA-ALARM
as much as possible.
There is a small CO2 leak
Find and stop the leakage, if not
that has lasted for over
found, call service.
8 hours
Phone: ..................................
Be aware that the CO2
CO2 AWARENESS
concentration is over 5000 ppm.
INDICATION
There is no danger.
SYSTEM FAULT
Check the manual, communication
cables and CO2-Sensor.
If no fault is found, call service.
Phone: ..................................
ALARM RESET
Press reset button until "Alarm
cleared!" is shown in the display
.
ALARM TEST
Press reset button until "Testing
system
...
" is shown in the display
.
Advertenties
Inhoudsopgave
