Inhoudsopgave
Advertenties
INSTRUCTIE! Gebruik een geldig e-mailadres voor registratie. Anders kan de service niet worden
gebruikt.
18 Configuratie / Instellen van een WI-FI-verbinding
1. If the base station has not yet been connected to a router, it will switch to AP (Access Point Mode)
mode after the first power supply. The display will show 'AP' and the symbol for WI-FI synchroniza-
tion.
2. Use a smartphone, tablet or computer to connect to Wi-Fi.
INSTRUCTIE! Het betreffende apparaat zelf moet ook uitgerust zijn met een WI-FI-functie.
3. In the system settings of the device, switch to W-LAN or WI-FI settings and select the wireless net-
work (SSID) named 'PWS-XXXXXX'.
4. After successful connection via the address bar of the web browser, enter the IP address
'http: //192.168.1.1' to establish a connection to the settings menu of the weather station.
INSTRUCTIE! Geef altijd 'http: //' aan het IP adres om browser afhankelijke verbindingsfouten te
voorkomen. Aanbevolen browsers: de nieuwste versie van Chrome, Safari, Edge, Firefox of Ope-
ra.
5. Make the following settings in the settings menu:
Select 'SETUP'
to enter settings menu
to search for a router
Select 'Add Router'
to add a router manually**
Password record
(if a password was entered)
(if an ID was entered)
(if a key was entered)
(if an ID was entered)
(if a key was entered)
*Leave field blank if registration is not yet available and entries are to be made later.
**Manual setup requires additional router information (including e.g. IP address, SSID, etc)
6. After completing the settings, the device will recognize the default WI-FI connection after each
restart.
7. In Access Point Mode, the WI-FI / SENSOR button can be pressed for 6 seconds to restore the
previous settings.
WI-FI-verbindingsstatus:
WI-FI symbol is shown in the
display
Connection to the WI-FI router
successful
Select 'Search'
ID record
Key record
ID record
Key record
WI-FI symbol flashes in the dis-
play
Connection to the WI-FI router
not stable or ongoing connection
Select 'ADVANCED'
to enter advanced settings menu
Select desired WI-FI router
If router is not listed, enter SSID manually
Select security type of the router (normally WAP2)
Enter password of the Router (leave field blank
if no password has been assigned)
Check to comfirm upload to Weather underground*
Enter 'Station ID' registered at Wunderground*
Enter 'Station Key' registered at Wunderground*
Check to comfirm upload to Weathercloud*
Enter 'Station ID' registered at Weathercloud*
Enter 'Station Key' registered at Weathercloud*
Select time server
Click to confirm entries
AP symbol flashes in the display
Access Point Mode enabled
13 / 20
Advertenties
Inhoudsopgave
