Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
D.12 Secure the Solar pole at the remaining 4
anchors.
D.13 Attach the power cable to your Yalp
interactive.
CAUTION Electric malfunction risk! Connecting
the cables in the wrong way could lead to an
irrevocable malfunction of the product. If your
Yalp interactive is not installed yet, skip the
following steps and continue at step D.17. Follow
step D.14-D.16 when the Yalp interactive has been
installed.
NOTICE
Make sure to connect the positive and
negative poles correctly.
D.14 MPPT is pre-installed.
D.15 Place the battery in the compartment.
D.16 Connect the battery cables to the battery
WARNING Lifting hazard! Single person lift could
cause injury. Work with two people when lifting the
battery.
WARNING Electric shock risk! As soon as two
poles are connected, energy will run through the
wires. Make sure to touch only one pole at a time.
NOTICE
Make sure to connect the positive and
EN
EN
negative poles correctly.
NL
E. EXCHANGING PARTS
DE
WARNING Electric shock risk! Disconnecting
FR
cables by pulling them from the middle could
cause product damage and electric shock risks.
Disconnect cables by pulling the end or the
connector part of the cable.
E.1 Unscrew the two screws and remove the
battery cover.
E.2 Demount the battery clamp. Remove the
battery from the Solar pole, while keeping it
connected.
WARNING Lifting hazard! Single person lift could
cause injury. Work with two people when lifting the
battery.
E.3 Disconnect the cables in the following order:
• Solar panel cable (A) from PV
• Battery cable (B) from batt
• Ground cable (C) from load
YA3200-210723
D.17 Connect the cables in the following order:
• Power cable (A) onto load
• Battery cable (B) onto batt
• Solar panel cable (C) onto PV
WARNING Electric shock risk! As soon as the
Solar panel receives sunlight it will generate
electricity, touching the wire ends could result in an
electric shock. Only touch the coated part of the
wires.
CAUTION Electric malfunction risk! Connecting
the cables in the wrong order could lead to an
irrevocable malfunction of the product. Make sure
to connect the cables in the right order.
NOTICE
Make sure to connect the positive and
negative poles correctly. If done right, a green LED
light in the power box of the interactive product is
visible. If not, the LED light turns red.
D.18 Place the battery inside the Solar pole. Mount
the battery clamp.
WARNING Lifting hazard! Single person lift could
cause injury. Work with two people when lifting the
battery.
D.19 Place and secure the battery cover.
D.20 Enjoy the sun!
WARNING Electric shock risk! When the Solar
panel receives sunlight it will generate electricity,
touching the wire ends could result in an electric
shock. Only touch the coated part of the wires.
CAUTION Electric malfunction risk!
Disconnecting the cables in the wrong order could
lead to an irrevocable malfunction of the product.
Make sure to disconnect the cables in the right
order.
NOTICE
You can now install the new battery
following the installation steps, starting from step
D.15.
E.4 Remove the MPPT according to image.
NOTICE
You can now install the new MPPT
following the installation steps, starting from step
D.14.
E.5 Descrew the 4 anchors of the Solar pole.
38
Advertenties
Inhoudsopgave
