Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit
during operation and keep it out of reach of children or animals. This product is not a toy,
LED lights are extremely bright and looking directly at the light source during operation can
lead to serious eye damage. Any other use of the device than described in the manual may
damage the product or cause danger to the user, e.g. due to a short circuit, fire or electric
shock. The safety instructions must be observed at all times.
06 Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety in-
structions of the device. Furthermore, we are not liable for consequential damage, damage
to objects or persons resulting from failure to observe the safety instructions and improper
use/handling of the device due to wear and tear. Product design and specifications are sub-
ject to change without notice. All logos and trade names are registered trademarks of their
respective owners and are hereby acknowledged as such.
07 Storage of the Manual
Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the commission-
ing and handling of the device. Keep all enclosed operating instructions for future reference.
If the device is sold or passed on to third parties, you are obliged to pass on the operating
instructions as these are lawfully part of the product.
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of the product.
If damaged, it must not be put into operation.
Installation:
1.
Ensure a clean and dry mounting surface.
2.
Count the number of T-couplings en shorten the cable as per the number of stairs by
cutting it off after the last T-coupling.
3.
The LED strip can be shortened („Fig. 4" on page 2)
4.
Follow the steps in the drawings.
(„Fig. 1" on page 2): remove the protective foil from the back of the 3M tape.
(„Fig. 2" on page 2): Place the LED strip on the mounting service (we advise the un-
derside of the tread).
(„Fig. 3" on page 2): Connect the separate LED-strips via the T-couplings with the
main power-cable (Pay attention to match the correct symbols on T-couplings and ca-
bles)
5.
Check all connections and put the plug in the socket.
09 Operating the product
The safety instructions and warnings must be observed to ensure both the perfect condition
of the product and safe operation.
10 Product maintenance
The all-in-one panel can be cleaned with clear water and a soft cloth. Do not use detergents
containing surface active agents or scouring agents.
401640-MAN-ML-2017122701-SHA - Complete Book A5.indb 5
5
2017-12-27 17:08:46
Advertenties
Inhoudsopgave
