Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
fireplace. Mark the 4 holes by a pen from the holes on the bracket. Take away the bracket and then drill
4pcs Φ8 holes on the wall. Put the plastic wall plug into the hole. If the wall is solid wood, it is no needed
to drill the holes on the wood and no needed of the plastic wall plug. Then use 4pcs ST5*40 to fix the
bracket to the wall.
STEP 3. With the firebox at an angle, fit the slots in the back of firebox over the hooks on the wall mount
bracket, and carefully press the top of the firebox against the wall mount bracket. The slots at the top
edge of the firebox should slide over the wall mount bracket tabs.
the thumb screws through the holes in the firebox and into the wall mount bracket tabs. Tighten both
thumb screws and make sure the firebox is secure to the wall.
STEP 4. For clear and white pebble stones media:
Carefully arrange the decorative stones (WS/CS) along the inset window ledge at the front of the firebox.
Use care when relocating the fireplace to prevent the stones from falling out.
STEP 5. For log media:
Carefully put the log on the fuel bed.
Hold the firebox in place and thread
17
Advertenties
Inhoudsopgave
