Inhoudsopgave
Advertenties
www.meyland-smith.dk Tel: +45 98 96 19 85
Leg separation plate:
The crossbar for the leg separation plate is mounted
between the front wheels (see figure 30).
The fittings at both ends of the crossbar are fastened
with the supplied small topplates around the fittings
holding the frontwheels. At each side two Allen screws are
screwed into the topplate from below through the
holes in the fitting at the end of the crossbar (see figure
31).
At the front the leg separation plate is equipped with a
square tube, and this is slid into the square tube at the
middle of the crossbar (see figure 32). The leg sepa- ration
plate can be adjusted in height by loosening the
handscrew on the crossbar (see figure 32).
Figuur 30
Figuur 31
Figuur 32
Pagina 11
Handscrew
Advertenties
Inhoudsopgave
