Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
▶ Glance Features
①
Power Switch Key
In the shutdown state, press the key in a short time
to power on. In the power on state, press and hold
the key for 3 seconds to shutdown or select the
temperature gear.
②
Temperature Settings Key
In the power on state, press the key in a short time to
switch the temperature.
③
Description of three indicators:
1. The left indicator is on, indicating that the temperature is the first gear
(145℃/285℉).
2. The left indicator and the middle indicator are on at the same
time, indicating the second gear temperature (160℃/320℉).
3. The three indicators are on at the same time, indicating the third gear
temperature (185℃/365℉).
▶ Operation guide
A. Setting: Plugin and switch on. Set the temperature according to different
base materials and iron-on types.
B. Get prepared: Make your workbench flat and stable. Use a heat-proof mat or
a folded fluffy towel to protect your workbench surface.
C. Preheat the base material: Place your base material on the mat/towel for 5
seconds to remove wrinkles and moisture.
D. Position and press: Place your design wherever you want on the base
material, and place the machine on the design.
E. Flip and repeat: Flip the base material and apply heat on the backside of the
design for 15 seconds.
If the transfer paper or heat transfer vinyl doesn't lift easily, reapply and reheat
- 7 -
Advertenties
Inhoudsopgave
