CLEANING AND MAINTENANCE
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine o昀昀 well. Never submerge
the machine in water!
CLEANING THE DUST RESERVOIR
1.
Press the dust reservoir unlock button to remove it from the vacuum cleaner.
Then take the 昀椀lters out of the dust reservoir. Empty the
2.
3.
Take part A from part B.
4.
The dust reservoir, part A and part B can be cleaned under running water. Do take care to
dry them completely before using them again in the
We advise replacing the 昀椀lters regularly to ensure an optimal operation of the machine. Dirty
昀椀lters will reduce the suction power drastically. After every cleaning, clean the dust reservoir
and the 昀椀lters to extend the life span of your machine.
CLEANING THE FLOOR BRUSH
Remove the 昀氀oor nozzle from the upright vacuum cleaner. Press the
1.
the back of the 昀氀oor nozzle and remove it from the machine.
Unclip the cover on the left side of the 昀氀oor nozzle.
2.
3.
Remove the
Remove hairs and other dirt that have wrapped around the 昀氀oor
4.
brush. If you do not clean the 昀氀oor brush regularly, it will become
damaged and your machine will become unusable.
The rotating 昀氀oor brush may be rinsed o昀昀 under running water.
5.
Make sure that it is completely
6.
Place the 昀氀oor brush back into the 昀氀oor nozzle when it is clean.
7.
Click the closure valve back into place to close it.
8.
Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can
brushes.
26
DO221SV
2
rotating 昀氀oor brush from the 昀氀oor nozzle.
dry before using it.
damage the machine or your 昀氀oor. Always remove the hairs stuck on the
dust reservoir.
machine.
A
B
release button at