Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DO496WK
PARTS
1.
Spout
2.
Button to open the lid
3.
Handle
4.
Water level indication
On/off switch with indicator light
5.
6.
Base
7.
Cord storage in the bottom of
the base
Removable filter
8.
BEFORE THE FIRST USE
Boil a full water kettle twice and pour away the
water before actually using the water kettle for the
first time.
USING THE WATER KETTLE
1.
Remove the water kettle from its base and open the lid by pressing the top button.
2.
Fill the water kettle with the desired amount of water. Make sure that the water level is always
higher than the minimum indication (0.5 l) and lower than the maximum indication (1.7 l).
If you have not added enough water, the water kettle will switch off before the
•
water boils.
•
If you have added too much water, the boiling water could escape through the
spout. That is why you should never exceed the maximum indication when filling
the kettle. Also, always make sure that the lid is properly closed before turning on
the watter kettle.
3.
Place the water kettle on its base.
4.
Plug in the appliance.
Press the on/off switch at the bottom of the handle. The indicator will light up and the water
5.
kettle will start the boiling process.
The water kettle will automatically switch off when the water boils. You can always stop the
6.
boiling process yourself at any moment by pushing the on/off switch upward.
Make sure that the on/off switch is clear of obstructions and that the lid is firmly
→
closed. The water kettle will not switch off automatically if the switch is hindered or
if the lid is still open.
7.
Remove the kettle from the base and pour out the water.
→
Be careful when pouring the water since it is possible to burn yourself on the boiling
water or the hot steam. Do not open the lid when the water in the water kettle is
hot.
8.
The water kettle will not start boiling again until the switch is pressed down again. Let the
appliance cool down for 30 seconds before reopening the water kettle to boil water.
•
The water kettle can remain on its base when the appliance is not being used.
•
Make sure that the water kettle does not receive any power when it is not being used, so
always unplug the appliance when not in use.
•
If by accident you would use the kettle without water in it, the boil dry protection will
automatically switch off the appliance. If this happens, let the water kettle cool down
completely before filling the kettle with cold water to start the boiling process.
1
8
20
6
7
2
3
4
5
Advertenties
Inhoudsopgave
