Advertenties
Beschikbare talen
Beschikbare talen
SAFETY PRECAUTIONS
Please note the following safety instructions. Failure to do so may
result in serious damage to the charger and batteries.
• Do not store the charger at temperatures below 5°C or over
50°C.
• Keep the charger away from dust, moisture, rain, heat, direct
sunlight and vibrations. Do not drop.
• Only use this charger on heat-resistant, non-flammable,
non-conductive surfaces. Never place it on carpets, car seats or
similar surfaces.
• Only charge power packs indicated in the instructions.
• Do not use a voltage or charge higher than that stipulated by
the manufacturer of the battery pack.
• Check carefully that the charger is set to the correct battery type
(e.g. LiPo, NiMh ) and the applicable technical specifications (e.g.
number of cells, voltage).
TECHNICAL DATA
500606092 2A charger:
Input voltage: 110-240V
Type of battery: Lithium, NiMH
Number of cells:
Lithium
2-3s
NiMH
4-8s
Maximum charging current: 2A
Maximum output power: 16W
Automatic switch-off: yes
Lithium battery connection:
• A lithium polymer (LiPo) battery pack should be put in a LiPo
charging bag or on a fire-resistant surface during charging.
• If your battery shows evidence of any abnormalities during the
charging process (overheating, hissing, swelling), remove the
battery from the charger immediately and place it away from
people and flammable materials.
• Never take the charger apart nor make any modifications to it.
• Never attempt to use the charger to charge or discharge
non-rechargeable batteries or damaged battery packs.
• Keep the charger away from children.
• Never leave the charger unattended when connected to the
power supply.
LED Status Lights
Li-Fe
Li-Po / Selection
charging current
2S Balance port
3S Balance port/
NiMH battery port
NiMH battery connection:
AC (100-240V) Input Interface
NiMH
7 // GB
Advertenties
