TO AN HDTV TELEVISION
sion using an HDMI cable
n using an HDMI cable (sold
d set it to HDMI mode.
a's screen will turn opaque
thin your device from your
TECHNIQUES
xel CMOS Sensor
Capture mode, Playback mode
een
to 32GB)
1080(30fps)]/[1280*720(60fps)]/
0fps)]
*1920]/[2048*1536]/
[1280*960]/[640*480]
rames per shoot
200/400/800
t/Cloudy/Tungsten/Fluor H
Video: MOV
attery(built-in)
1(mm)
DJA100IM1363_6Sept_V06.indb 31
All manuals and user guides at all-guides.com
BICYCLE MOUNT (Assembly)
21
22
24
1. Unscrew the screw (22) from the yoke joint.
2. Position the yoke joint (21) and its rubber pad around the
bicycle handlebars and tighten the screw (22) until it is firmly
attached. Ensure that this part is firmly screwed in again in order
to ensure effective fastening.
3. To use the waterproof case, insert the camera in the
waterproof case (19), and then re-close it using its latch,
ensuring that the latch is fully re-closed.
4. Position the waterproof case on the bicycle mount's (23)
attachment screw and screw in the case until it is firmly
attached.
5. To adjust the camera's position, loosen the screw (24) and
move the camera up or down, and then screw the screw in again
once the camera has been adjusted to the desired position.
Ensure that this part is firmly screwed in again in order to ensure
effective fastening.
Note: the waterproof case must be properly closed again and it
is only waterproof to a depth of 10 metres.
19
23
31
06/09/2013 5:38 PM