Using the heater
!
WARNING! Fire hazard
• Do not leave the heater unattended
when in use.
• Always turn the control knob off and
unplug the heater from the socket
when the heater is not in use.
I
NOTE
This heater is equipped with a tip switch
that switches the heater off if it tips over.
No. in
fig. 1, page 3
A
Thermostat control dial
B
Function setting dial
1
Maximum heat setting
2
Minimum heat setting
3
0
4
5
6
II
7
Tip switch
Connecting
1. Place the heater on a flat, stable and horizontal
surface.
2. Arrange the cord in accordance with the safety
instructions, away from traffic areas and where
it will not be tripped over.
3. Insert the plug into the socket.
Setting the temperature
For cool air:
1. Turn the thermostat dial (A) clockwise towards
maximum setting (1).
2. Turn the function setting dial (B) towards fan
only setting (
).
3. Check that everything is working correctly.
6
All manuals and user guides at all-guides.com
Description
Off
Cooling fan only setting
I
750 W setting
1500 W setting
For heating:
1. Turn the function setting dial (B) to the 750 W
setting (I) for a hot temperature.
2. Turn the function setting dial (B) to the 1500 W
setting (II) for a very hot temperature.
3. After the room has reached the desired
temperature, turn the thermostat dial (A)
counter-clockwise until a "click" sounds. The
desired temperature will be kept constant by
the thermostat function.
Disconnecting and storing
!
CAUTION!
Ensure that the heater cools down
completely before storing.
1. Turn the function setting dial to "Off".
2. Turn the thermostat control dial to "minimum".
3. Unplug the heater from the socket.
Cleaning and maintenance
!
WARNING!
Unplug the heater from the socket before
cleaning and maintenance.
A
NOTICE!
• Do not use sharp or hard objects or any
cleaning or chemical products.
• Ensure that no water/moisture enters
the openings of the heater.
1. Clean the outer surface of the heater using a
lightly damp cloth.
2. Dry the heater thoroughly with a dry cloth.
4445103325