Inhoudsopgave
Advertenties
preparing THe appLiance For operaTion
1. Ensure that you have selected a safe loca-
tion.
2. Comply with all safety instructions and
safety regulations.
3. Plug the mains plug of the appliance into an
electrical outlet (220-240 V ~ 50 Hz)
4. Select the desired temperature level on the
rotary regulator.
ƒ Level 1 for less heat (800 watt),
ƒ Level 2 for more heat (1,200 watt)
5. The indicator light on the lower part of the
appliance shows that the appliance is in
operation.
cLeaning anD care
1. switch off the appliance.
2. unplug the plug from the electrical outlet.
3. allow the appliance to cool completely.
4. Never use any abrasive scouring agents,
steel wool, metal objects, hot cleaning
agents or disinfectants.
oVerHeaTing proTecTion circuiT
1. The appliance is equipped with an overhe-
ating protection circuit that switches the
appliance off when it is heated over 70 °C.
2. If the overheating protection circuit has
been tripped, switch the appliance off,
unplug the plug from the electrical outlet
and let the appliance cool for at least 10
minutes.
3. Eliminate the cause of the overheating, (e.g.
excessive dust in the appliance, air outlet
All manuals and user guides at all-guides.com
5. To clean the filter,
open the filter cover.
Remove the filter and
clean it with warm water
that must not be hotter
than 30°C. (If the filter
is dirty you can simply
6. To switch off the appliance, place the rotary
regulator on the 0 position.
7. Always switch off the appliance after use by
placing the rotary regulator in the 0 posi-
tion, and unplug the appliance from the
electrical outlet.
Be aware that the appliance can be-
come very hot - fire hazard! Particular-
ly ensure that children are kept away
from the appliance.
replace it. Take the filter out and replace
it with a new filter, which you can order
directly from us at any time.)
6. Allow the filter dry completely, before you
reinsert it. Then carefully close the filter
cover.
7. You can remove dust in the appliance if you
carefully hold a vacuum cleaner against the
air inlet and outlet grille.
8. Store the fan heater in a dry, safe place so
that it is protected from dust, shocks, heat
and moisture.
grille is covered) and start up the appliance
again.
4. If after eliminating the cause, you still can-
not switch the appliance back on, or if the
overheating protection circuit switches on
without an apparent reason, contact our
customer service organisation.
17
Advertenties
Inhoudsopgave
