Inhoudsopgave
Advertenties
English
ADD LIGHT SOURCES TO YOUR
STEERING DEVICE:
Before you can use your light source you'll
need to pair it with a steering device.
To add more light sources, just repeat the steps
below:
1. Make sure that your light source is installed
and the main power switch is turned on.
2. Hold the steering device close to the light
source you want to add (no more than 5 cm
away).
3. Press and hold the pairing button
at least 10 seconds. A red light will shine
steadily on the steering device. Your light
source will begin to dim and finally flash one
time to indicate that it has been successfully
paired.
Up to 10 light sources can be paired with 1
steering device.
8
for
Advertenties
Inhoudsopgave
